Images are representations only.
LTX02 Continous Capacitance Level Transmitter
Brand: Intempco Controls, IncINTEMPCO LTX02 series 2-wire level transmitters are essentially LTX01 transmitters assembled with a concentric tube.
As such LTX02 sensors can measure tank levels of liquids in metallic as well as non-metallic tanks. All other performance specifications are identical to LTX01 sensors.
Level measurement of water based liquids in non-metallic tanks, using a teflon coated probe is an ideal application for the LTX02.
To obtain a linear output in an irregularly shaped tank, such as a cone, use a concentric tube LTX02.
For oils and mineral based liquids in non-metallic and metallic tanks use LTX02 with a bare SS316 probe. Make sure that the liquids are compatible with SS316 and PFA Teflon materials.
Features- Continuous loop-powered 4-20 mA operation
- Microprocessor based
- Accuracy 1% of span for constant dielectric of material
- Non-interactive zero and span calibration
- Calibration accomplished with 4 push buttons
- Heavy duty industrial design
- NEMA rated aluminum, stainless, PVC and explosion proof housings available
- Standard fitting 1-1/2" NPT, flange and special fittings available
- SS316 outside tube
- Choice of bare SS316 or Teflon coated probe
Specifications
Accuracy
- ± 1 % of Full Span (Constant Dielectric)
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Calibration
- Via 4 Push-Button Switches Non-interactive Zero & Span
Capacitance
- 10 to 10,000 PF
Conduit Connection
- 1/2” NPT Male
- 3/4” NPT Male
- PG9 Gland
Damping Adjustment
- 0 to 30 seconds
Enclosure, Body Material
- 316 Stainless Steel
- Aluminum Flip-Cover
- PVC
Environmental Protection
- IP66
- NEMA 4
- NEMA 4X
Flange Material
- 316 Stainless Steel
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
Flange Type
- Raised Face (RF)
Loop Resistance
- 700 ohms at 24 Vdc, Max.
Materials of Construction
- Tube Material: 316 Stainless Steel
Mounting
- Remote DIN Rail Module
NPT Connection
- 1” NPT Male
- 1/2” NPT Male
- 1-1/2” NPT Male
- 1-1/4” NPT Male
- 3/4” NPT Male
Output
- 4-20 mA, Loop Powered
Pressure Range
- bar: 1 to 34
- kPa: 100 to 3,400
- psi: 14.5 to 500
Process Temperature
- 200° C (392° F) - Max.
Repeatability
- ± 0.1 % of Span
Sensor, Probe Length
- Probe: 6 to 240” (152.4 to 6,096 mm)
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Supply Voltage
- 12-36 Vdc
- Water and Water-Based Liquids in Non-Metallic Tanks.
- Jacketed Probes Required for Conductive Media
- Organic Acids Compatible with SS316
- Oils and Fuels in Metallic and Non-Metallic Tanks
- Use Bare Probes With Non-Conductive Media
- On-Site Calibration Required
- Not Recommended Where Material Dielectric Changes