Images are representations only.
LSA01-DT RF Capacitance Dual-Point Level Switch
Brand: Intempco Controls, Inc
INTEMPCO LSA01-DT is a highly reliable microprocessor based ON/OFF RF Capacitance level switch with up to 2 independently adjustable non-interacting set points.
It may be used in liquids and dry bulk solids in metal tanks. In non-metallic tanks, a grounding rod needs to be installed.
The LSA01-DT system consists of signal transmitter mounted in an enclosure, a mounting fitting and a rigid probe of up to 20 feet (6,096 mm) long.
Probe material is SS316, supplied bare or PFA Teflon jacketed.
DIN Rail Remote Module features an adjustable time delay, field selectable Failsafe operation, 2 DPDT output relays, LED status indication, and a simple push button calibration.
It can be installed up to 300 meters (1,000 feet) away from the process where calibration is performed.
Features- RF capacitance adjustable dual-point level switch
- Detecting independent non-interactive dual-points, detecting a single point, tip sensitive or at any point along the probe, high and/or low level
- Detecting level of liquids, powder bulk solids, slurries or foam
- Detecting the level of any material with dielectric constant greater than 1.5
- Disregards effects of product build-up on the probe
- Power supply 12-36 Vdc, 100 mA at 24 Vdc - 240 mW maximum
- Field selectable Failsafe modes
- Micro-processor based electronics mounted in remote DIN rail enclosure, up to 300 meters (1,000 feet)
- Adjustable time delay for output
- Status indication LEDs
- Pump control of one relay
- Many probe options and materials
- Standard fitting 3/4" NPT, special fittings or Flange
- NEMA rated aluminum, stainless, PVC or explosion proof enclosure
- Heavy duty industrial design
Specifications
Accuracy
- ± 0.1” (2 mm) for Constant Dielectric
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Approvals & Certifications
- Class I, Groups B, C, D, Class II, Groups E, F, G, Class III, CENELEC: EExd IIC, IP66 NEMA 4, 7B, C, D, 9E, F, G, Class I, Class II, Div. 2, Groups C & G
Capacitance
- 10 to 10,000 PF
Conduit Connection
- 1/2” NPT Female
- 3/4” NPT Female
- PG9 Gland
Consumption
- Power: 100 mA at 24 Vdc
- Power: 240 mW, Max.
Delay Time
- 1 second on Make (0 to 30 seconds Adjustable)
Electrical Rating
- 2.5 A at 230 Vac Non-Inductive
- 3 A at 26 Vdc Non-Inductive
- 5 A at 115 Vac Non-Inductive
Enclosure, Body Material
- Aluminum Flip-Cover
- Cast 316 Stainless Steel
- Machined 316 Stainless Steel
- PVC
Environmental Protection
- IP66
- NEMA 4
- NEMA 4X
Flange Material
- 316 Stainless Steel
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
Flange Type
- Raised Face (RF)
Indication
- LED
Mounting
- Remote DIN Rail Module
NPT Connection
- 1” NPT Male
- 1/2” NPT Male
- 1-1/2” NPT Male
- 1-1/4” NPT Male
- 3/4” NPT Male
Pressure Range
- psi: 14.5 to 500 (kPa: 100 to 3,400, bar: 1 to 34)
Process Temperature
- 200° C (392° F) - Max.
Repeatability
- ± 0.1 % of Setting
Sensitivity
- 0.5 PF
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Supply Voltage
- 12-36 Vdc
Switch Type
- DPDT
- SPDT
- In Pharmaceutical, Waste Treatment, Chemical & Food/Beverage & All Industrial Plants
- Liquids, Water-based & Oil-based in Metal Tanks
- Organic Acids Compatible with Stainless 316 & Teflon